Dealing with Insufficient Airflow in High-Pressure Blowers:  

1. Large Rotor Gap: Adjust the gap using tools for pneumatic conveying.  

2. Air Leakage in Seals: Replace the sealing device.  

3. Clogged Filter Mesh: Replace or clean the filter.  

Solving Motor Overload in Three-Lobe High-Pressure Roots Blowers:  

1. Poor Lubrication: It is advised to switch to high-quality lubricating oil.  

2. Oil Ring Not Rotating or Rotating Slowly: Repair or replace the oil ring.  

3. Misalignment of Shaft Motor: Realign the shaft motor.  

Addressing Seal Damage in Three-Lobe High-Pressure Roots Blowers:  

1. High Coaxiality Error of Seal Ring and Shaft Sleeve: Replace worn parts.  

2. Shaft Bending or Foreign Objects Entering Seal Ring: Remove debris and realign the shaft.  

3. Excessive Rotor Vibration or Large Bearing Gap: Replace bearings to eliminate deformation impact.  

Features of the Three-Lobe High-Pressure Roots Blowers by Yuexie Blower Manufacturer (Suitable for Powder Conveying):  

1. Constant Volume Blower: No internal compression; gas transportation is forced, with little change in flow as pressure varies.  

2. Three-Lobe Straight Blade Design: Smooth intake and exhaust pulsation, resulting in low noise.  

3. Special Curve Blades: More reasonable meshing, minimal leakage, high efficiency, and low energy consumption, making it a new energy-saving product.  

4. Compact Structure: Employs various new structural designs, making the entire machine compact, small in size, lightweight, and aesthetically pleasing.  

5. High-Precision Hard Gear Surface Synchronous Gear: Long lifespan and low noise.  

6. Clean Air Conveyance: Delivers oil-free and dust-free air.  

- Previous Article: The Material Lock Pump Perfectly Solves the Coal Powder Discharge Problem in Coal-Fired Power Plants  

- Next Article: Calculation of Blower Speed  

- Return to List